Crestron · Interfase p/automatizacion
DIN-AO8
Eight 0-10V analog output control portsInterface for 3rd-party lighting and heating/coolingFully programmable functionality via DIN-AP2Visit the Crestron® Lighting Fixture Compatibility page to find out which Crestron lighting devices have been tested and are compatible with third party lighting fixtures.
Precio para clientes
Creá tu cuenta y accedé a precios, stock y cotizaciones.
Solicitar cuenta de cliente¿Ya tenés cuenta? Ingresá
Descripción técnica
The DIN-AO8 is a DIN rail-mounted automation control module that provides eight analog output ports for interfacing with third-party lighting and heating/cooling systems.
Analog Outputs
Each analog output port provides a 0 to 10 Volt DC control signal ideally suited for controlling 0-10V lighting dimmers and heating/cooling valves. Ten-bit resolution ensures precise recall of lighting and climate control settings and smooth ramping between levels.
Override Input
An override input is provided to allow an external contact closure to momentarily override the control system program and set each output to its override preset level. Levels can be adjusted and saved locally from the front panel, or remotely via software.
DIN Rail Installation
The DIN-AO8 is designed to snap onto a standard DIN rail for installation in a wall mount enclosure or mounted on a wall panel. Wiring connections are made using detachable screw terminals positioned along the top and bottom, clearly accessible from the front for easy installation and servicing. All setup controls and indicators are positioned on the center front panel. When installed in an enclosure utilizing 45 mm cutouts, the DIN-AO8's front panel stays accessible while the connections are concealed.
Cresnet®
The DIN-AO8 communicates with a DIN-AP2 2-Series Automation Processor, or other Crestron 2-Series control system, via the Cresnet control network. Cresnet also powers the DIN-AO8. A pair of Cresnet ports is provided on the DIN-AO8 allowing for easy daisy-chaining of several DIN Rail Series automation control modules.
Key Features
• Eight 0-10V analog output control ports
• Interface for 3rd-party lighting and heating/cooling
• Fully programmable functionality via DIN-AP2
• Setup via front panel or software
• Override input
• Cresnet communications
• 6M wide DIN rail mounting
Dimensiones físicas
Ancho
10.6 cm
Alto
9.4 cm
Profundidad
6.0 cm
Peso
0.18 kg
Identificación del fabricante
Modelo
DIN-AO8
SKU fabricante
DIN-AO8
Especificaciones técnicas19
Connections
Controls & Indicators
Enclosure
Power Requirements
Environmental
Documentación15
Spec Sheet for: DIN-AO8
Hoja técnica
Manor Home Condo Conversion
Material de marketing
Solar Decathlon Europe 2010
Material de marketing
Perion Networks
Material de marketing
CAD Drawing for: din-ao8
Recursos para especificar
din_rail
Recursos para especificar
DIN Rail Automation System
Recursos técnicos
Typical DIN-AO8 Application
Recursos técnicos
Installation and Operations Guide for DIN-AO8
Guías y manuales
Product Information: DIN-AO8
Guías y manuales
Firmware : DIN-AO8 1.000.0012
Software y firmware
Drawing: DIN-AO8
Multimedia · Imagen
Master Drawing: DIN-AO8
Multimedia · Imagen
CB Safety Cert DIN-AO8
Certificados
DoC DIN-AO8
Certificados
Productos relacionados (15)
Sugeridos por el fabricante.















