Crestron · Dimmer p/automatizacion
DIN-4DIMFLV4
4 channels of 0-10 Volt dimming control Supports 120 and 220 to 240 Volt, 50/60 Hz applications Allows switching of lighting and exhaust fans[1] Visit the Crestron® Lighting Fixture Compatibility page to find out which Crestron lighting devices have been tested and are compatible with third party lighting fixtures.
Precio para clientes
Creá tu cuenta y accedé a precios, stock y cotizaciones.
Solicitar cuenta de cliente¿Ya tenés cuenta? Ingresá
Descripción técnica
The DIN-4DIMFLV4 is a 4-channel lighting control module designed to dim 0-10 Volt drivers and ballasts. A single model supports both 120 and 220 to 240 Volt applications. The DIN-4DIMFLV4 may also be used for switching of non-dimmable lighting loads up to 5 amps[1] and 1/2 HP motors.
Override Input
An override input is provided to allow an external contact closure to momentarily override the control system program and set each channel output to its override preset level. Levels can be adjusted and saved locally from the front panel or remotely via software.
DIN Rail Installation
The DIN-4DIMFLV4 is designed to snap onto a standard DIN rail for installation in a wall mount enclosure. Wiring connections are made using screw terminals positioned along the top and bottom, clearly accessible from the front for easy installation and servicing. All setup controls and indicators are positioned on the center front panel. When installed in an enclosure utilizing 45 mm cutouts, the DIN-4DIMFLV4's front panel stays accessible while the connections are concealed.
Cresnet®
The DIN-4DIMFLV4 communicates with Crestron® control systems such as the DIN-AP2 or DIN-AP3 Automation Processors via the Cresnet control network. Use one of the unit’s two Cresnet ports to daisy-chain several DIN Rail Series automation control modules.
Key Features
• Provides 4 channels of 0-10 Volt dimming control
• Supports 120 and 220 to 240 Volt, 50/60 Hz applications
• Allows switching of lighting and exhaust fans[1]
• Includes an override input
• Communicates using Cresnet®
• Sets up via the front panel or through software
• Offers programmable functionality via DIN-AP2 or DIN-AP3
• Mounts on a 9M wide DIN rail
• CEC Title 24 2013 Compliant
1. May not be compatible with some high inrush current loads.
Dimensiones físicas
Ancho
15.9 cm
Alto
9.5 cm
Profundidad
6.0 cm
Peso
0.26 kg
Identificación del fabricante
Modelo
DIN-4DIMFLV4
SKU fabricante
DIN-4DIMFLV4
Especificaciones técnicas28
Load Ratings
Connections
Controls & Indicators
Documentación18
Michaello
Material de marketing
University of Surrey
Material de marketing
Westchester Home
Material de marketing
Light Iron Interactive Sculpture
Material de marketing
Perion Networks
Material de marketing
CAD Drawing for: din-4dimfl4
Recursos para especificar
din_rail
Recursos para especificar
Typical DIN-4DIMFLV4 Applicaiton
Recursos técnicos
DIN-4DIMFLV4
Guías y manuales
Product Manual: DIN-4DIMFLV4
Guías y manuales
Product Information: DIN-4DIMFLV4
Guías y manuales
Spec Sheet: DIN-4DIMFLV4
Hoja técnica
Firmware : DIN-4DIMFLV4 1.000.0016
Software y firmware
Drawing: DIN-4DIMFLV4
Multimedia · Imagen
Master Drawing: DIN-4DIMFLV4
Multimedia · Imagen
DoC DIN-4DIMFLV4
Certificados
KCC DIN-4DIMFLV4 Certificate
Certificados
Product Manual: DIN-4DIMFLV4 (HTML)
Guías y manuales
Accesorios compatibles (2)
Complementos que el fabricante lista para este producto.
Productos relacionados (15)
Sugeridos por el fabricante.















