AT-GAIN-M120

The Gain Audio AT-GAIN-M120 is a mixer amplifier designed for low or high impedance education and commercial applications. A mode selector switch allows the GAIN-M120 to deliver two channels of 60 watts each into 4 or 8 ohms, or a single channel of 120 watts at 70 or 100 volts.

Features

• 2 X 60 watts @ 4 or 8 ohms

• 1x 120 watts @ 70 or 100 volts

• Configurable inputs: 4 analog inputs, mono/stereo, mic (phantom power) or line.

• DSP controls: Per-input gain/ducking; per-output delay, EQ, filters, and level trim.

• Multiple mixes: Separate mixes and gain for amp and line outputs.

• Auto ducking: Drops program audio when a priority source (e.g., teacher mic) is active.

• Standby mode: Lowers power use when idle.

• Mute control: Mute via contact closure, IP, or RS-232.

• Optional GAIN-VOL volume control wall plate.

• Optional GAIN-NET network audio interface.

• Includes captive screw connectors, power cord, short rack ear, long rack ear, and dual mounting plate.

Applications

• Classrooms: Distribute lesson audio to low impedance speakers in the room, lower program audio when teacher speaks in a microphone, and mute audio for PA announcements.

• Meeting Rooms: The GN-GAIN-A1443 receive audio from an AV switcher or DSP, and then feed the audio to a high impedance distributed speaker network in the room.